Solid-liquid dual-use density meter

HTD-120SL solid liquid dual-purpose density meter conforms to the Archimedes principle and adopts Taiwan imported host with one thousandth precision. It is easy to operate, widely used and fully functional. Can judge whether the test object is qualified or not, and give an alarm. The assembly is made of a single-piece aluminum alloy solid measuring fitting without a lid, and the transparent sink is simpler, faster and more user-friendly. The liquid mode uses a no-memory dynamic measurement method that eliminates the need for key memory. With 3 sets of mode density measurement function, when measuring different liquids, you can directly change the weight without resetting. It has a display mode of concentration and can also directly display Baume degree.

Applicable

The fast multi-function solid-liquid hydrometer is suitable for quality management, cost control, new formulation modulation, new material research, etc.

Standards

According to the standards of ASTM D792、 ASTM D297、 GB/T1033、GB/T2951、 JIS K6268、 ISO 2781、ISO 1183、GB/T11540、GB/T12206、GB/T5518 etc.

Feature

1, With the ability to determine the pass or fail, and prompt the alarm

2, With water temperature setting function, air buoyancy compensation function

3, With rubber DIN volume wear, ARI wear index, Acron wear, expansion rate, quality and volume change rate direct reading measurement function

4, For the powder, also has the pycnometer true density measurement function

5. For the porous product, it has the functions of boiling saturation method, immersion saturation method, vacuum saturation method, surface sealing wax covering method, surface Vaseline coating method, etc.

6, For liquid, also has a pycnometer density measurement function

7. For porous products, it has the functions of measuring porosity, oil content and water absorption.

8, With RS-232C communication interface, easy to connect PC and printer, optional printer to print measurement data

9, Equipped with special windproof dust cover, easy to combine, sturdy and durable

Technical parameter

1. Density analysis: 0.0001 g/cm3

2. Max weighing: 120g

3. Min weighing: 0.001g

4. Measurement range: 0.0001-99.9999g/cm3

Solid feature

1. Quick test without cover, easier, faster, more efficient, more suitable for on-site quick test

2, For the research and development of new materials, It can show the percentage of the main material content of the mixture

3, Powder metallurgy, magnetic materials, ceramics, refractory materials, friction materials, precious metals and other similar porous products can be measured

4, Using water as a medium, you can also use other liquid media

5, With actual water temperature setting, measuring medium density setting, waterproof processing medium density setting

6, With air buoyancy compensation setting, density upper and lower limit setting function

7. It adopts one-piece large-capacity professional measuring platform, high transparent sink, wear-resistant and fall-resistant, anti-corrosion

Liquid feature

1. Any solution can be measured quickly without restriction. One thousandth of precision

2, With three sets of dynamic memory measurement method, measuring fast, efficient, accurate, can achieve multiple continuous cycle test

3, with Baume degree measurement function, can directly display Baume degree

4, Easy debugging and operation than Wechsler balance method and specific gravity bottle method

5, The sample density can be measured from room temperature to 100℃

6, Convenient sampling, only 50CC is needed for the tested sample, or less sampling device can be customized

7, Configuration one-piece stainless steel measuring hook

8. The measuring cup is easy to clean and is not restricted by the small diameter of the pycnometer. It can be reused. One-time measuring cups can also be used

9, Volatile liquid, corrosive liquid, viscous liquid, strong acid and strong alkaline liquid can be quickly measured